2E PS2000RT, 2000VA/1800W, RT3U, LCD, USB, 3xC13, 3xSchuko

SKU: 2E-PS2000RT

As a result of shelling of power system facilities in various cities in Ukraine fan and emergency power outages have been introduced. Therefore, at any moment, it is possible to stop the power supply and, as a result, turn off important equipment, which can lead to its damage or even complete failure. 2E brand uninterruptible power supply (UPS) will save in these cases.

Characteristics
Where to buy
Type Line-interactive
Installation type Rack/Tower
Maximum output power, VA 2000
Effective output power, W 1600
Input voltage range, V Bypass mode: 0~242/264/276/288 for 200/220/230/240 ± 10; network mode: 220: 165-280, 230: 175-290, 240: 185-300
Input frequency, Hz 50-60 (automatic detection)
Output voltage range, V Bypass mode: 0 ~ 242/264/276/288 for 200/220/230/240 ± 10 V; network mode: 200: 166-226, 220: 188-245, 230: 199-254, 240:210-264
Output frequency, Hz 50-60±0.3 (adjustable)
Inverter overload 110% for 2 min (network mode)
125% for 1 min (network mode)
150% for 10 s (network mode)
110% for 1 min (inverter mode)
125% for 10 s (inverter mode)
150% for 5 s (inverter mode)
Sockets 3xSchuko, 3xC13
Built-in battery 12V/ 9Ah x3
Interfaces USB, RJ45, optional SNMP adapter
Display Yes
Noise level, dB ≤50
Operating temperature 5-40 °C
Relative humidity ≤ 93%
Colour Black
Protection Overheat protection, overload protection, short circuit protection, low battery voltage protection, overcharge protection
Additionally LED indication, AVR automatic voltage regulation, Cold start and Restart functions, ECO mode, intelligent battery management
Dimensions (WxDxH), mm 440х410х132
Weight, kg 21.3
Manufactured China
Warranty 2 years for electronics, 1 year for batteries
Manual
Drivers&Software

In the event of a power outage or other problems with the network, the output sockets continue to receive voltage from the UPS for a limited time. Connect critical equipment, such as a computer, monitor or other data transmission devices, to the output sockets.

 

Do not connect non-computer related equipment to the UPS, such as medical equipment, life support equipment, microwave ovens, and vacuum cleaners.

 

An input fuse/circuit breaker provides protection against unstable input current.

 

2E-PS2000RT UPS linear-interactive type with a capacity of 2,000 VA / 1,600 W with built-in batteries. Input: 242-288 VAC. Output: 200/220/230/240 VAC ± 5%, «pure» sine wave. The frequency is 50/60 Hz ± 5% (automatic detection). Automatic test at power-on. AVR automatic voltage stabilization. Also, the UPS is equipped with three batteries (12 V / 9 Ah). The charging current (max.) is 1 A. In addition, RJ45 and USB connectors and an optional SNMP adapter are provided. An LCD display built into the front panel displays information about the device’s operating status, including error codes.

 

With a weight of 21.3 kg, the device has a rather ergonomic shape, the size is 440 × 410 × 132 mm. Installation type: TOWER. The noise level is 50 dB (1 m). The product has «cold start» and restart functions, protection against overload, short circuit, overheating, full battery discharge. In addition, the device has automatic charging when turned off. ECO power saving mode available.

 

This UPS is intended for indoor use only, in a closed, controlled environment.