Generator 2E Gasolin Generator 2E Gasolin 380V,50HZ, 7.5KW
A gasoline generator is a source of electricity that will help ensure the operation of household appliances, garden and lighting equipment, computers, etc. in unforeseen situations, but not only! Also, the unit will be useful for the improvement of country houses, at the campsite – anywhere where connection to the centralized power grid is not available.
- Type: gasoline
- Power 7 kW
- Three phases
- Air cooling
- Manual/electric start
- Fuel tank volume 25 l
- Two outlets
- Handle and wheels for transportation
| Type | Generator |
| Fuel type | Petrol |
| Alternator type | Synchronous |
| Rated power, kW | 7 |
| Maximum power, kW | 7.5 |
| Rated voltage, V | 220 |
| Frequency, Hz | 50 |
| Number of phases | 3 |
| Startup type | Electric, manual |
| Tank capacity, l | 25 |
| Continuous operation time, h | 8 |
| Engine cooling | Air |
| Outlets | 1xShuko (16A-230V), 1 triphase (32A-380V) |
| Features | Automatic voltage regulation (AVR), 3-in-1 display, hour meter, voltmeter, frequency meter, oil level sensor, fuel level sensor, short circuit protection, low oil level protection |
| Dimensions (WxHxD), mm | 710x555x600 |
| Weight, kg | 92.4 |
2E-BS9500TE-V three-phase model with a four-stroke engine with a nominal power of 7 kW is the best option for providing backup power for private houses or cottages, but if necessary, it can be «overclocked» to 7.5 kW. This is quite enough to establish the main communications operation in the house: in particular, to provide lighting, power up the water pump, electric stove, refrigerator, TV, water heater, even the boiler and other sensitive devices using the inverter. Two methods of starting the unit are available – manual and electric. The generator runs on gasoline, the fuel tank volume is 25 l. The design includes two outlets, a handle and wheels for transport, that is a useful addition, because at 710 × 555 × 600 mm the device weighs 88 kg.
The generator operation is accompanied by the formation of a significant amount of heat, which must be removed to prevent the unit overheating. It is for this purpose that a fan is built into the body, which, creating an air flow, forcibly «pushes out» the heated air. Such a system has its advantages, in particular: it provides simple care and operation of the generator; there is no need to constantly pour cooling liquid; simple and quick repair due to clear design.
