2E Garden Hose AquaFlex Graphite 1/2″ 15m 4 layers 20bar -10+50°C
The reinforced 2E-GHC12C15 AquaFlex Graphite series garden hose will withstand tough conditions and heavy loads. Hose length is 15 m, diameter is 1/2″. Multilayer (4 layers) provides increased resistance to UV rays and chemicals, wear resistance, high flow capacity, flexibility and resistance to twisting, increased operating water pressure (20 bar).
- Hose diameter 1/2″ (12.5 mm)
- Hose length 15 m
- Number of layers 4
- Temperature range from -10 to +50 °C
- Resistant to UV rays
- Bursting pressure 20 bar
- Material PVC
- Wall thickness 1.6 mm
- Weight 95 g/m
- Transverse reinforcement
- Outer layer, color: gray with yellow stripe
- Inner layer: white
| Type | Garden Hose |
| Series | Aquaflex Graphite |
| Hose diameter | 1/2″ (12.5 mm) |
| Hose length, m | 15 |
| Number of layers, pcs | 4 |
| Temperature range | From -10°C to +50°C |
| Burst pressure, bar | 20 |
| Material | PVC |
| Wall thickness, mm | 1.6 |
| Weight, g/m | 95 |
| Outer layer color | Gray with yellow stripe |
| Inner layer color | White |
| Features | Does not contain cadmium, barium and lead; resistant to UV rays |
| Additionally | Transverse reinforcement |
| Made in the EU | Yes |
| Warranty | 2 years subject to operating conditions |
The AquaFlex Graphite hose is made of high-quality PFC materials and is free of cadmium, barium and lead. It is flexible and lightweight, allowing for a wide range of applications. The hose is 15 m long, so it can be used to irrigate a lawn, garden, clean chad paths, building facades, and even wash a car. The common 1/2″ diameter allows for a comfortable connection to the water supply.
Consists of 4 layers, which increases its service life for several seasons in a row. Thanks to the transverse reinforcement, it will be protected from mechanical damage or tearing at the bends. It is resistant to UV radiation – you can safely leave it under the sun and not worry about its safety. It retains its operational properties when exposed to a wide range of temperatures (from -10 to +50 °C). The special design prevents the deposition of algae inside – the water flowing through the hose will be of high quality.
To extend the hose’s service life for many seasons, you need to follow basic rules. The water pressure supplied to the hose must not exceed the operating pressure of the hose. Before preparing for winter storage, remove all water from the hose and allow it to dry thoroughly. The hose must not be kinked during storage. The recommended temperature in the room where the hose is stored should be at least 0 °C.