Updated Lineup of 2E Charging Stations

Home
News

The 2E charging station range has been completely updated. The devices are in stock at ERC and are available for shipment.

ADVANTAGES OF 2E CHARGING STATIONS

High-capacity LiFePO4 (Class A) batteries with a service life of > 2,000 cycles, which allow the stations to be actively used for a long time without losing capacity.

Ultra-fast smart charging. Thanks to the powerful built-in inverters, any station can be charged from 0 % to 80 % from a 220 V grid in just 1-1.5 h, and up to 100 % in just 1-2 h (depending on the model). The devices can also be charged from any alternative power source (solar panels, generators, wind turbines, batteries, cars). This makes the stations useful in the event of a prolonged power outage and allows them to be quickly recharged for further use.

UPS (uninterruptible power supply) function. This option ensures that the battery life (cycles) is used only when it is needed. By connecting the charging station between the grid source and the consumer, when the grid supply is available, it will pass this electricity through the «through» way, without using either the battery or the built-in inverter, thereby preserving their resource. When there is a power outage in the grid, the charging station will switch power to its battery with a minimum delay that will be imperceptible even to sensitive PCs.

A new level of security! Modern BMS. Each charging station has six protection systems against: overcharging, deep discharge, overcurrent, overheating, short circuit and overvoltage, which prevent device breakdown due to the most common cases and provide additional reliability and durability.

Control via the app. Thanks to the built-in dual BT wireless and Wi-Fi module, the 2E SYLA station is fully synchronized via the Tuya Smart app, so you can remotely monitor the station, turn on or off sockets and ports, and integrate it into your smart home ecosystem.

Innovative 2E Parallel System. The power and capacity are doubled! The function is supported by SYLA and SYAYVO models.

The Widest Range of Capacities on the Market:

2E Dzherelo Portable Power Station, 600 W, 560 Wh, Fast Charging

Product code: 2E-PPS06056

The 2E Dzherelo portable charging station is equipped with a 600 W inverter (1,000 W peak) and has a 560 Wh LiFePO4 battery capacity. Thanks to the built-in innovative features and technologies, it will provide backup or alternative power to the necessary devices.

A constant source of energy that is always at hand. The Dzherelo 2E portable charging station will help minimize the consequences of a centralized power outage at the local level. It is equipped with a 600 W inverter (peak 1,000 W). The compact body has a sturdy folding handle for easy transportation.

Powerful battery. Modern, safe, and durable LiFePO4 batteries (class A) are the key to the long service life of the 2E Dzherelo, even under heavy use. A single 220 V Schuko AC socket with grounding extends the number of types of consumers that can be powered. The battery capacity is sufficient, for example, to operate the Star Link terminal for 7 h!

Higher-level functionality. One of the key functions is ultra-fast and intelligent charging from the 220 V grid or any other AC source. Thanks to the AC input of up to 500 W, the power station can be charged from 0 % to 80 % in just 1 h, and up to 100 % in just 1.5 h of operation from the grid or generator. The charging station does not consume peak power at the start, but does so discretely, «measuring» the capabilities of the grid and not creating starting peak loads.

The 2E Dzherelo is equipped with a built-in MPPT controller with a capacity of up to 240 W and a voltage of 12 V to 50 V with a current of up to 12 A, which allows the power plant to be charged with portable solar panels of almost any power rating up to 240 W. For example, a 200 W panel can charge the 2E charging station in just 3 h in sunny weather! In case of parallel use, it is possible to double the solar power using each MPPT of the station. It is also possible to charge via a car cigarette lighter or with another DC battery. The model has an XT60 DC connector and is compatible with almost any modern portable solar panel.

With UPS, the battery life (cycles) can be used only when needed. When connecting the 2E Dzherelo charging station between the power source and the consumer, when the grid is powered, electricity passes through the grid in a «through» way, i.e. without involving either the battery or the built-in inverter, which helps to preserve their resource. When the grid power supply is interrupted, the charging station switches power to the built-in battery with minimal delay, which will go unnoticed even by PCs and other sensitive equipment. It is not recommended to use the charging station as a typical UPS. The UPS function has a limited time of continuous use.

Reliably protected. The 2E Dzherelo charging station is equipped with a modern BMS board, which provides six protection systems: overcharge, deep discharge, overcurrent, overheating, short circuit, and overvoltage.

Additional options. The built-in flashlight can serve as an additional light source.

IMPORTANT! Do NOT store the device when it is discharged. Be sure to charge to 100 % when you first turn it on.

Features

iFePO4 battery capacity 560 Wh, 25,000 mAh
Battery life >2,000 cycles
AC output power 600 W (peak power 1,000 W)
1 × Schuko 220 V, 50 Hz socket
USB-C output – PD-100 W × 1; 5 V, 2.4 A × 2
DC output 12-12.5 V, 8 A, 100 W
AC output rated capacity 504 Wh
DC input up to 50 V, 12 A
AC input 220 V, 500 W
XT60 DC MPPT: support for solar panels with 12-50 V to 240 V voltage
AC output 220 V, 600 W (peak power 1,000 W)
DC output 12.5 V, 8.3A
USB-A × 2: 5 V, 2.4 A; 1 × QC 18 W
USB-C × 2: 5 V, 2.4 A; PD 100 W × 1: 5 V/9 V/12 V/15 V/20 V, 3.25 A
Operating temperature range -10~40 °C
Charging temperature range 0~40 °C
Size 254 × 200 × 182 mm
Weight 6.5 kg

2E Snagha 2 Portable Power Station, 1,200 W, 1,050 W/h, Fast Charging

Product code: 2E-PPS1210-2

The new generation 2E Snagha 2 portable charging station is an updated and more powerful version of the already popular 2E Snagha. The rated power of the pure sine wave inverter is 1,200 W, and the capacity of the LiFePO4 battery is 1,050 Wh. The model is equipped with innovative features and technologies, making it the optimal solution for backup or alternative power supply.

An improved and efficient station. 2E Snagha 2 is designed to charge even more devices than its popular predecessor. Its wide design options, combined with a rated pure sine wave inverter power of 1,200 W, ensure efficient performance.

Durability under heavy use. Modern, safe and long-lasting LiFePO4 batteries (class A) ensure a long service life even under heavy use. Two 220 V AC Schuko sockets with grounding significantly expand the number of consumers that can be powered.

Functionality for wide use. One of the key features is the ultra-fast and intelligent charging from the 220 V grid or any other AC source. Thanks to the AC input of up to 1,200 W, the power station can be charged from 0 % to 80 % in just 40 min and up to 100 % in just 1 h of operation from the grid or generator. The charging station does not consume peak power at the start, but does so discretely, «measuring» the capabilities of the grid and not creating starting peak loads.

The 2E Snagha 2 is equipped with a built-in MPPT controller with a capacity of up to 400 W and a voltage of 10 V to 50 V with a current of up to 13 A, which allows the power plant to be charged with portable solar panels of almost any power rating up to 400 W. For example, a 400 W panel can charge the 2E charging station in just 3 h in sunny weather! In case of parallel use, it is possible to double the solar power using each MPPT of the station. It is also possible to charge via a car cigarette lighter or with another DC battery. The model is equipped with an XT60 DC connector and is compatible with almost any modern portable solar panel.

With UPS, the battery life (cycles) can be used only when it is needed. When the 2E Snagha 2 charging station is connected between the grid source and the consumer, when the grid supply is available, electricity flows through the grid in a «through» way, i.e. without involving either the battery or the built-in inverter, which helps to preserve their life. When the grid power supply is interrupted, the charging station switches power to the built-in battery with minimal delay, which will go unnoticed even by PCs and other sensitive equipment. It is not recommended to use the charging station as a typical UPS. The UPS function has a limited time of continuous use.

Powerful protection. The 2E Snagha 2 charging station is equipped with a modern BMS board, which provides six protection systems: overcharge, deep discharge, overcurrent, overheating, short circuit, overvoltage.

Wireless charging of devices with a power of 15 W. It provides fast and convenient charging of devices without the use of additional cables. The function is activated separately from other DC ports (USB), which allows you to use the top cover of the charging station as a table for devices that are charged via connectors without worrying about possible interaction with induction.

Advantages of use. The built-in flashlight can serve as an additional source of lighting. Ergonomic handles on the sides make it easy to transport. The design includes a built-in compartment with a lid for storing all the necessary cables and adapters.

IMPORTANT! Do NOT store when discharged. Be sure to charge to 100 % when you first turn it on.

Features

LiFePO4 battery 1,050 Wh
Battery life >2,000 cycles
AC output power 1,200 W (peak power 2,400 W)
2 × EU 220 V, 50 Hz sockets
USB-C output – PD-65 W × 15 V, 2.4 A × 2
DC12V output – 12.5 V, 8 A – 100 W
Wireless charging 15 W
AC output rated capacity 945 Wh
AC input 1 200 W
DC input 10-50 V, 13 A (support for 12-30 V)
XT60 DC MPPT: supports solar panels with a voltage of 10-50 V up to 400 W.
AC output 220 V, 1,200 W (peak power 2,400 W)
DC output 12.5 V, 8.3 A
USB-A × 2: 5 V, 2.4 A; 1 × QC 18 W
USB-C × 2: 5 V, 2.4 A; PD65 V × 1: 5 V, 9 V, 12 V, 15 V, 20 V, 3.25 A
Operating temperature range -10 ~ 40 °C
Charging temperature range 0~40 °C
Size 366 × 235 × 267 mm
Weight 12 kg

2E Syla Portable Power Station, 1,500 W, 1,280 W/h, Wi-Fi/BT, Parallel Connection, Fast Charging

Product code: 2E-PPS1512

The innovative new generation 2E Syla portable charging station with a rated inverter power and pure sine wave of 1,500 W (3,000 W peak) and a LiFePO4 battery capacity of 1,280 Wh. The station is equipped with modern features and technologies, such as remote control via the app and 2E Parallel System.

An alternative and powerful source of electricity. The 2E Syla portable charging station is a powerful power bank that can be used to charge more than just smartphones, laptops or tablets. Its performance makes it possible to connect a variety of household devices thanks to its 1,500 W pure sine wave inverter (3,000 W peak).

Long-lasting power supply. Modern and safe LiFePO4 batteries (Class A) with a capacity of 1,280 Wh ensure that the 2E Syla charging station will last for a long time, even under heavy use. Two 220V Schuko AC sockets with grounding significantly expand the number of types of consumers that can be powered.

Remote, convenient control with the Tuya Smart app. The 2E Syla charging station can be controlled, monitored and customized from anywhere. Remote monitoring, switching sockets and connectors on or off can be done remotely thanks to the dual wireless module via BT and Wi-Fi with full data synchronization via the Tuya Smart app.

Innovative 2E Parallel System. The 2E Dual Power Parallel System (2E-APS-250-1530, not included) combines the inverter power and battery capacity of two 2E Syla charging stations, resulting in a total power output of 3,000 W and a total capacity of 2,560 Wh. This makes it possible to connect super-powerful devices or devices with high inrush currents that cannot be powered by other, less powerful charging stations. At the same time, the life of the stations is not exhausted excessively due to the intelligent, even distribution of consumption between the two stations. The 2E Dual Power parallel connection system is equipped with a 30 A power socket.

Wide functionality. One of the key features is ultra-fast and intelligent charging from the 220 V grid or any other AC source. Thanks to an AC input of up to 1,200 W, the power station can be charged from 0 % to 80 % in just 60 min, and up to 100 % in just 1.5 h of operation from the grid or generator. At the same time, the charging station does not consume peak power at the start, but does so discretely, «measuring» the capabilities of the grid and not creating starting peak loads.

The 2E Syla is equipped with a built-in MPPT controller with a capacity of up to 400 W and a voltage of 10 V to 60 V with a current of up to 13 A, which allows the power plant to be charged using portable solar panels of almost any power rating up to 400 W. For example, a 400 W panel can charge the 2E charging station in just 4-5 h in sunny weather! In case of parallel use, it is possible to double the solar power using each MPPT of the station. It is also possible to charge via a car cigarette lighter or using another DC battery. The model is equipped with an XT60 DC connector and is compatible with almost any modern portable solar panel.

With UPS, the battery life (cycles) can be used only when it is needed. When the 2E Syla charging station is connected between the grid source and the consumer, when the grid supply is available, electricity flows through the grid in a «through» way, i.e. without using either the battery or the built-in inverter, which helps to preserve their life. When the grid power supply is interrupted, the charging station switches power to the built-in battery with minimal delay, which will go unnoticed even by PCs and other sensitive equipment. It is not recommended to use the charging station as a typical UPS. The UPS function has a limited time of continuous use.

Reliable protection. The 2E Syla charging station is equipped with a modern BMS board, which provides six protection systems: overcharge, deep discharge, overcurrent, overheating, short circuit, overvoltage.

Additional options. The built-in flashlight can serve as an additional source of lighting. Ergonomic handles on the sides make it easy to transport. The design includes a built-in compartment with a lid for storing all the necessary cables and adapters.

IMPORTANT! Do NOT store when discharged. Be sure to charge to 100 % when you first turn it on.

Features

LiFePO4 battery 1,280 Wh, 51.2 V, 25,000 mAh
Battery life ≥ 2,000 cycles
AC input 220-240 V, 50 Hz (max. 1,200 W)
MPPT input 10-60 V, 13 A (max. 400 W)
USB outputs: 2 × USB Type-C: 5 V, 3 A; 9 V, 3 A; 12 V, 3 A; 15 V, 3 A; 20 V, 5 A (max. 100 W); 4 × USB-A: 5 V, 3 A; 9 V, 2 A; 12 V, 1.5 A; (one 18 W max., two 15 W max. simultaneously)
DC outputs 4 × 12 V, 10 A (max. 120 W)
Car port 12 V, 10 A (max. 120 W)
AC outputs 2 × 210-230 V, 50 Hz, 2,400 W max (3,000 W peak)
Pure sine wave
Wireless interfaces Wi-Fi, BT
Operating temperature -10~40 °C
Size 374 × 265 × 263 mm
Weight 17 kg

2E Gart Portable Power Station, 2,000 W, 2,160 W/h, Fast Charging

Product code: 2E-PPS2020

The 2E Gart portable charging station with a rated inverter power of 2,000 W and pure sine wave is equipped with a high-capacity 2,160 Wh LiFePO4 battery. The model is characterized by innovative features and technologies, making it a reliable source of backup or alternative power.

Power in a smart design. The Gart 2E charging station provides independent power supply for various devices. The rated power of the pure sine wave inverter is 2,000 W. The convenient and compact body, as for such power, is equipped with two wheels and a retractable telescopic handle for easy transportation and storage.

Long-lasting battery. Modern, safe and durable LiFePO4 batteries (class A) ensure the long service life of the Gart 2E even under heavy use. The two 220 V Schuko AC sockets with grounding significantly expand the number of types of consumers that can be powered.

Higher-level functionality. One of the key features is the ultra-fast and intelligent charging from the 220 V grid or any other AC source. Thanks to an AC input of up to 1,500 W, the power station can be charged from 0 % to 80 % in just 1.5 h, and up to 100 % in just 2 h of operation from the grid or a generator. At the same time, the charging station does not consume peak power at the start, but does so discretely, «measuring» the capabilities of the grid and not creating starting peak loads.

2E Gart is equipped with a built-in MPPT controller with a capacity of up to 400 W and a voltage of 10 V to 50 V with a current of up to 13 A, which allows the power plant to be charged using portable solar panels of almost any power rating up to 400 W. For example, a 400 W panel can charge the 2E charging station in just 3 h in sunny weather! In case of parallel use, it is possible to double the solar power using each MPPT of the station. It is also possible to charge via a car cigarette lighter or with another DC battery. The model is equipped with an XT60 DC connector and is compatible with almost any modern portable solar panel.

With UPS, the battery life (cycles) can only be used when it is needed. When the 2E Gart charging station is connected between the grid source and the consumer, when the grid supply is available, electricity is passed through in a «through» way, i.e. without involving either the battery or the built-in inverter, which helps to preserve their life. When the grid power supply is interrupted, the charging station switches power to the built-in battery with minimal delay, which will go unnoticed even by PCs and other sensitive equipment. It is not recommended to use the charging station as a typical UPS. The UPS function has a limited time of continuous use.

Effective protection. The 2E Gart charging station is equipped with a modern BMS board, which provides six protection systems: overcharge, deep discharge, overcurrent, overheating, short circuit, overvoltage.

Wireless charging of devices with a power of 15 W. It provides fast and convenient charging of devices without the use of additional cables. The function is activated separately from other DC (USB) ports, which allows you to use the top cover of the charging station as a table for devices that are charged via connectors without worrying about possible interaction with induction.

Additional option. The built-in flashlight can serve as an additional light source.

IMPORTANT! Do NOT store discharged. Be sure to charge to 100 % when you first turn it on.

Features

LiFePO4 battery capacity 2,160 Wh, 48 W, 45,000 mAh
Battery life >2,000 cycles
AC output power 2,000 W (peak power 4,000 W)
2 × Schuko sockets (220 V, 50 Hz)
USB-C output – PD-100 W × 1; 2 × 5 V, 2.4 A
DC output 12-12.5 V, 8 A, 100 W
Wireless charging 15 W
AC output rated capacity 1,946 Wh
DC input 50 W, 13A (support 10-50 W)
AC input 220 V, 1,500 W
XT60 DC MPPT: support for solar panels with a voltage of 10-50 W up to 400 W
AC output 220 V, 2,000 W (peak power 4,000 W)
DC output 12.5 W, 8.3 A
USB-A × 2: 5 W, 2.4 A; 1 × QC 18 W
USB-C × 2: 5 W, 2.4 A; PD 100 V × 1: 5 W/9 W/12 W/15 W/20 W, 3.25 A
Operating temperature range -10~40 °C
Charging temperature range 0~40 °C
Size 470.5 × 289 × 366 mm
Weight 25 kg

EQUIPMENT FOR CHARGING STATIONS

2E Solar Panel Adapter, MC4 Connector, Car Cigarette Lighter, 0.5 m

Product code: 2E-ASP-CCP-MC4-0.5

The 2E solar panel adapter is designed to power, for example, pumps and smartphones from a solar panel or any other PV panel via a car cigarette lighter. The design includes an MC4 connector for connecting to a solar panel and a car cigarette lighter for connecting devices directly. The maximum voltage is 12.6 V and the current is 10 A. The 0.5 m long cable, which complies with EN 50525, has a cross-section of 2 mm² (14AWG), and the contact material is tinned copper. The polarity is color-coded for easy connection. When using the 2E adapter with the 2E MC4-2T1 or 2E MC4-3T1 splitter cables, two or more solar panels can be connected simultaneously.

Features

MC4 connector and car cigarette lighter
Polarity is marked
voltage 12.6 V
current 10 A
Cable cross-section 2 mm² (14AWG)
Compliance with EN 50525 standard
Contacts made of tinned copper
Length 0.5 m

2E XT60 Adapter, Car Cigarette Lighter (Plug), 1 m

Product code: 2E-ASP-XT60-CCP-1

The 2E XT60 car adapter is used to recharge charging stations and electronic devices that are powered via the XT60 connector from a car cigarette lighter. The length of the 2E XT60 adapter is 1 m. It is easy to connect and disconnect without the use of additional tools. For convenience, the polarity is color-coded.

Features

XT60 connector type and car cigarette lighter (plug)
Maximum operating voltage up to 12.6 V
Maximum operating current up to 10 A
Cable cross-section 2.0 mm² (14AWG)
Cable standard EN 50525
Operating temperature range -15°C ~ +80°C
Contact material tinned copper
Cable length 1 m

2E MC4-Anderson Solar Panels Cable, 0.5 m

Product code: 2E-ASP-MC4-AND-0.5

The 2E Anderson-MC4 cable is designed to easily and quickly connect a portable solar or any other PV panel with MC4 to a charging station, in particular 2E 2,000 W, or compatible chargers with an Anderson connector. When used in conjunction with the 2E MC4-2T1 or 2E MC4-3T1 splitter cables, it is possible to connect two or more solar panels to the charging station for faster charge recovery. In addition, the product is suitable for use even in adverse environmental conditions, with an operating temperature range of -40 °C to +85 °C. The maximum voltage is 300 V, and the current is 30 A. The model with tinned copper contacts is manufactured in accordance with CE62930, IEC131, H1Z2Z2-K standards. The 0.5-meter-long cable has a 4 mm² cross-section, ensuring stable operation and durability. The polarity is color-coded for easy reference. It is suitable for use in adverse environmental conditions.

Features

MS4 and Anderson connectors
voltage 300 V
current 30 A
Cable cross-section 4 mm²
Compliance with CE62930, IEC131, H1Z2Z2-K standards
Contacts made of tinned copper
Length 0.5 m

2E XT60-MC4 Solar Panels Cable, 1 m

Product code: 2E-ASP-XT60-MC4-1

The 2E-ASP-XT60-MC4-1 solar panels cable is an effective component for easy and quick connection of a portable solar panel or any other PV panel to a charging station, including 2E SNAGHA, or compatible chargers with the XT60 connector. When used in conjunction with 2E MC4-2T1 or 2E MC4-3T1 splitter cables, two or more solar panels can be connected to the charging station for faster charge recovery. In addition, the product is suitable for use even in unfavorable environmental conditions, with an operating temperature range of -40 °C to +85 °C. The maximum voltage is 1,000 V, and the current is 30 A. The model with tinned copper contacts is manufactured in accordance with CE62930, IEC131, H1Z2Z2-K standards. The 1-meter-long cable has a 4 mm² cross-section, which ensures stable operation and durability. The polarity is color-coded for easy reference. It is suitable for use in adverse environmental conditions.

Features

MS4 and XT60 connectors
voltage 1,000 V
current 30 A
Cable cross-section 4 mm²
Compliance with CE62930, IEC131, H1Z2Z2-K standards
Tinned copper contacts
Length 1 m

2E MC4-1T3 Solar Panels Connectors Set

Product code: 2E-ASP-MC4-1T3

Two 2E MC4-1T3 3-line splitter cables, which are made of quality materials, are designed for parallel or series-parallel connection of portable solar or PV panels. They are suitable for connecting solar panels (or solar array chains) with the same voltage. They allow you to expand an existing or build a new solar system, either permanently installed or portable. Can be used in unfavorable environmental conditions. Simple connection and disconnection is provided without the use of additional tools.

Branching scheme: 1 × male (+) to 3 × female (-) and 1 × female (-) to 3 × male (+).

Features

MS4 connectors
operating voltage up to 1,000 V
operating current up to 30 A
Operating temperature range -40 °C ~ +85 °C
Contact material tinned copper

2E MC4-2T1 Solar Panels Cables Set, 30 cm

Product code: 2E-ASP-MC4-2T1

The 2E cable set with MC4 connectors is useful for efficient parallel or series-parallel connection of portable solar or PV panels. The set consists of two Y-shaped cables made of quality materials, which are designed to reliably and safely connect two or more solar panels (or solar array chains) with the same voltage. Branching scheme: 2 × male (+) to 2 × female (-) and female (-) to 2 × male (+). The polarity is color-coded: «+» is red, «-» is black. The cables can be used to expand an existing or build a new solar panel system, either stationary or portable. The maximum voltage is 1,000 V, and the current is 30 A. The products comply with CE62930, IEC131, H1Z2Z2-K standards, and the contact material is tinned copper. Each 30 cm cable has a 4 mm² cross-section for optimal performance and reliability. The polarity is color-coded for easy reference. Suitable for use in adverse environmental conditions.

Features

Two Y-shaped cables
Branching scheme: 2 × male (+) to 2 × female (-) and female (-) to 2 × male (+)
MC4 connectors
voltage 1 000 V
current 30 A
Cable cross-section 4 mm²
Compliance with CE62930, IEC131, H1Z2Z2-K standards
Tinned copper contacts
Cable length 30 cm

2E XT60-MC4 Solar Panels Cable, 3 m

Product code: 2E-ASP-XT60-MC4-3

The 2E XT60-MC4 cable is used to easily and quickly connect a portable solar panel or any other PV panel with MC4 connectors to storage stations or any other chargers with XT60 connectors (e.g. 2E SNAGHA charging station).

When used in conjunction with 2E MC4-2T1 or 2E MC4-3T1 splitter cables, 2 or more solar panels can be connected to the charging station for faster charging.

Can be used in unfavorable environmental conditions. Easy to connect and disconnect without the need for additional tools. Polarity is color-coded.

Features

MS4 and XT60 connectors
operating voltage up to 1,000 V
operating current up to 30 A
Cable cross-section 4 mm²
Compliance with CE62930, IEC131, H1Z2Z2-K standards
Operating temperature range -40 °C ~ +85 °C
Contact material tinned copper
Cable length 1 m

2E MC4-1T4 Solar Panels Connectors Set

Product code: 2E-ASP-MC4-1T4

Two 2E MC4-1T4 4-line splitter cables, which are made of quality materials, are designed for parallel or series-parallel connection of portable solar or PV panels. They are suitable for connecting solar panels (or solar array chains) with the same voltage. They allow you to expand an existing or build a new solar system, either permanently installed or portable. Can be used in unfavorable environmental conditions. Simple connection and disconnection is provided without the use of additional tools.

Branching scheme: 1 × male (+) to 4 × female (-) and 1 × female (-) to 4 × male (+).

Features

MS4 connectors
operating voltage up to 1,000 V
operating current up to 30 A
Operating temperature range -40 °C ~ +85 °C
Contact material tinned copper

2E MC4-4T1 Solar Panels Cables Set

Product code: 2E-ASP-MC4-4T1

Two 2E MC4-4T1 4-line splitter cables are designed for parallel or series-parallel connection of portable solar or PV panels with MC4 connector. They are suitable for connecting two or more solar panels (or two or more solar array chains) with the same voltage, while preventing mutual influence of the panels. They allow expanding an existing or building a new solar panel system, either permanently installed or portable. Can be used in unfavorable environmental conditions. Simple connection and disconnection is provided without the use of additional tools.

Branching scheme: 1 × male (+) to 4 × female (-) and 1 × female (-) to 4 × male (+). Polarity is color-coded: «+» is red; «-» is black.

Features

MS4 connectors
operating voltage up to 1,000 V
operating current up to 30 A
Cable cross-section 4 mm²
Compliance with CE62930, IEC131, H1Z2Z2-K standards
Operating temperature range -40 °C ~ +85 °C
Contact material tinned copper
Length of one cable ~30 cm

2E MC4-MC4 Solar Panels Extension Cable, 4.5 m

Product code: 2E-ASP-MC4-MC4-4.5

The 4.5 m long extension cable for solar panels has MC4 connectors on both sides. It is designed for easy interconnection of solar panels and energy storage devices and extension of existing cables. When used in conjunction with 2E MC4-2T1 or 2E MC4-3T1 splitter cables, two or more solar panels and other devices can be connected.

It is suitable for use outdoors and in adverse weather conditions. It has an IP67 protection rating and is resistant to high/low temperatures, UV radiation, and corrosion. The inner core of the cable is made of 6 mm² (10 AWG) tinned copper, which has good conductivity and oxidation resistance.

Simple connection and disconnection without the use of additional tools. The polarity is color-coded for easy reference.

Features

Cable length 4.5 m
Number of wires 2 pcs.
Conductor material tinned copper
Cross-section 6 mm² (10 AWG)
MC4 connector type
Operating temperature range -40 °C + 85 °C
Maximum operating voltage up to 1,000 V
Maximum operating current up to 30 A

2E MC4-3T1 Solar Panels Cables Set, 30 cm

Product code: 2E-ASP-MC4-3T1

The 2E cables set with MC4 connectors will be useful for efficient parallel or series-parallel connection of portable solar or PV panels. The set consists of two 3-line splitter cables made of quality materials, which are designed to reliably and safely connect two or more solar panels (or solar array chains) with the same voltage. Branching scheme: 2 × male (+) to 3 × female (-) and female (-) to 3 × male (+). The polarity is color-coded: «+» is red, «-» is black. The cables can be used to expand an existing or build a new solar panel system, either stationary or portable. The maximum voltage is 1,000 V, and the current is 30 A. The products comply with CE62930, IEC131, H1Z2Z2-K standards, and the contact material is tinned copper. Each 30 cm cable has a 4 mm² cross-section for optimal performance and reliability. The cables are suitable for use in adverse environmental conditions.

Branching scheme: 2 × male (+) to 3 × female (-) and female (-) to 3 × male (+).

Features

Two cables for three lines
MC4 connectors
voltage 1,000 V
current 30 A
Cable cross-section 4 mm²
Compliance with CE62930, IEC131, H1Z2Z2-K standards
Tinned copper contacts
Cable length 30 cm

ADDITIONAL EQUIPMENT FOR PARALLEL CONNECTION

2E Dual Power Stations Parallel Connection System

Product code: 2E-APS-250-1530

With the 2E Dual Power system, you can connect 2 2E Syayvo stations in parallel, doubling their capacity and power.

Features

2 AC inputs 250 V, 15 A
1 AC output 250 V, 30 A

Complete Set:

Communication cable with GX16-6F connectors (1 m) × 1;
Unit for parallel connection of AC outputs × 1;
AC cables, plug type (1 m) × 2;
AC power adapter «socket» × 1;
AC adapter L6-30P, plug type × 1.

2E 100 W Portable Solar Panel , 2S, 3M Anderson, QC3.0, USB-A (max. 24 W), Type-C (max. 45 W)

Product code: 2E-PSPLW100

The 2E-PSPLW100 portable solar panel is the optimal solution for those who want a reliable source of energy in almost any conditions: camping, traveling or at the frontline – anywhere where centralized power is not available. The 100 W model is characterized by a high conversion rate (22-23.5%) and a well-thought-out design: the panel has two sections, supports for installation at the optimal angle, and convenient handles for easy transportation. In addition, the device can truly be considered mobile: weighing 2.9 kg, it measures 560 × 632 × 45 mm when folded, so it won’t take up much space in a bailer, for example, while when unfolded, it measures 1,265 × 560 × 25 mm. Another undeniable advantage of the model is the richness of interfaces. The panel is equipped with DC, USB-A, USB-C, and Anderson connectors, which makes it suitable for use with various types of devices and charging stations. And QC3.0 technology will charge a compatible battery up to 50 % in about 30 min, while automatically detecting the optimal voltage level to maximize charging efficiency. The output DC current is 12 V-20 V, 5 A (max).

Features

Power output 100 W
Conversion rate of 22-23.5
Two sections
Folding design
Comfortable handles
DC, USB-A, USB-C and Anderson connectors for connecting to charging stations
0 technology

2E 250 W Portable Solar Panel, 4S, 3M MC4/Anderson

Product code: 2E-PSPLW250

The 2E portable solar panel is a compact «assistant» that collects solar energy and converts it into electricity, so it will be useful for charging various types of devices when the power grid is unavailable. The panel is in demand among outdoor enthusiasts and will also be useful for the military at the front, as it allows them to recharge important devices such as GPS navigators, radios, smartphones, batteries, etc. The 2E-PSPLW250 has a power output of 250 W, a high conversion rate of 22-23.5%, and consists of four sections. With a weight of 6.12 kg, the panel size is 560 × 565 × 50 mm – quite compact and can easily fit in a tourist backpack. When unfolded, the device has a much larger «working» surface – 3,035 × 560 × 25 mm, and the design includes a comfortable handle and supports for installation at the optimal angle. As for the connectors, the model is equipped with MC4, Anderson, XT60, DC5.5 for connecting solar panels to each other and to other system components, such as inverters or charge controllers.

Features

Power output 250 W
Conversion rate of 22-23.5
Four sections
Folding design
Comfortable handles
MC4, Anderson, XT60, DC5.5 connectors for connecting solar panels to each other and to other system components

2E 300 W Portable Solar Panel, 4S, 3M MC4/Anderson

Product code: 2E-PSPLW300

The 2E-PSPLW300 portable solar panel will become an indispensable source of electricity in unforeseen situations when the power supply is limited or completely unavailable. Its principle of operation is to collect solar energy and convert it into electricity, and its main advantage is mobility. With a power output of 300 W, the model weighs 40 percent less than solar panels of the same power and amounts to 7.1 kg. However, this does not affect the conversion rate of 22-23.5%. In addition, the 2E-PSPLW300 is ergonomically designed for ease of use: the four-section panel is foldable, and the reliable handles ensure easy transportation. When folded, the device measures 718 × 630 × 45 mm, and when unfolded, it measures 2,355 × 718 × 25 mm. For efficient solar energy collection, the panel can be installed at an angle thanks to special supports. And in addition, the lightweight portable solar panel is undoubtedly versatile, as it boasts a wealth of interfaces, namely: MC4, Anderson, XT60, DC5.5 for connecting solar panels to each other and to other system components.

Features

Power output 300 W
Conversion rate of 22-23.5
Four sections
Weight reduced by 40 %
Folding design
Comfortable handle
MC4, Anderson, XT60, DC5.5 connectors for connecting solar panels to each other and to other system components

2E 400 W Portable Solar Panel, 4S, 3M MC4/Anderson

Product code: 2E-PSPLW400

The 2E-PSPLW400 portable solar panel will become an indispensable «assistant» when traveling, camping, even in difficult frontline conditions. Its features include efficiency, ease of use, and lightweight transportation. The model has a power of 400 W and a high conversion rate of 22-23.5%, so it maximizes the use of solar energy to charge connected devices. Another key feature of the 2E panel is its reduced weight (by 40 %) compared to devices with similar power, which makes it more portable. In addition, the model has a folding design and a comfortable handle for easy carrying and deployment. Weighing 9 kg, it measures 800 × 795 × 45 mm and 3,030 × 800 × 25 mm when unfolded. The 2E-PSPLW400 consists of four sections, providing panel flexibility and adaptability to different environments. In addition, it is equipped with a variety of interfaces for easy connection of almost any device. In particular, the panel has a standard MC4 connector, as well as additional Anderson, XT60 and DC5.5 connectors for connecting solar panels to each other and to other system components. The output DC current is 12-40 V, 10 A (max.).

Features

Power 400 W
Conversion rate of 22-23.5
Four sections
Weight reduced by 40 %
Folding design
Comfortable handle
MC4, Anderson, XT60, DC5.5 connectors for connecting solar panels to each other and to other system components