2E SD10000 UPS, 10kVA/10kW, LCD, USB, Terminal in&out 2E-SD10000
In view of the military present, the source of uninterrupted power supply of 2E brand is a must-have for business and the stable functioning of critical public institutions, in particular, maternity hospitals, laboratories, etc. The model has a power of 10 kW. 2E SD10000 type: online double conversion. UPS of this class provide the most reliable protection of the connected equipment against interruptions in the power grid, which undoubtedly compensates for the costs of its purchase and installation. The operation principle is that the input AC voltage is converted by the rectifier into DC, and then by the inverter – back into AC. Even in the presence of large deviations in the input voltage, 2E UPS continues to supply the connected devices with a pure sinusoidal stabilized voltage. The lack of switching between modes (mains to battery) allows to minimize the risk of damage to «sensitive» equipment. In particular, such UPSs are used for uninterrupted power supply of medical equipment, for data centers and enterprises with a continuous production cycle. The input voltage range is: 110 ~ 176 VAC (linear derating between 50% and 100% load); 176 ~ 288 VAC (no degradation). Input: single-phase three-wire (1F + N + PE). Output: single-phase three-wire (1F + N + PE), in addition, it is possible to adjust the voltage 208/220/230/240 V.
Type | Online with double conversion |
Installation type | Tower |
Maximum output power, VA | 10000 |
Effective output power, W | 10000 |
Input | Single phase N-PE |
Input voltage range, V | 110-176 (linear derating between 50% and 100% load), 176-288 (no derating) |
Input frequency, Hz | 40-70 (automatic detection) |
Maximum current, A | 1 |
THD input | ≤5% |
Output | Single phase N-PE |
Output voltage range, V | 208/220/230/240 |
Output frequency, Hz | 50-60±1% (automatic detection) |
THD output | ≤1% linear load; ≤4% non-linear load |
Inverter overload | 105%-110% for 10 min 110%-125% for 1 min >126%-150% for 30 s |
Efficiency | ≥ 94% (Mains mode), max. 95% (Battery mode), ≥ 98% (ECO mode) |
Sockets | Terminal block |
Built-in battery | 12V/ 9Ah x16 |
Ability to connect external batteries | 12V/ 9Ah x16 |
Interfaces | RS-232, USB, optional SNMP adapter |
Display | Yes |
Typical recharge time (up to 90%), h | 9 |
Noise level, dB | ≤58 |
Operating temperature | 0-40 °C |
Relative humidity | 0-95% (non-condensing) |
Colour | Black |
Protection class | IP 20 |
Protection | Overheat protection, fan test protection, overload protection, output short circuit protection, low battery protection |
Dimensions (WxDxH), mm | 191х495х711 |
Weight, kg | 62 |
Manufactured | China |
Warranty | 2 years for electronics, 1 year for batteries |
The operating frequency range of 2E SD10000 model is within 40 ~ 70 Hz (automatic detection). The UPS is equipped with sixteen batteries (12 Bt/9 Ah), which restore the charge to 90% in just 9 hours! The charging current (max.) is 1 A. In addition, various RS-232, USB and an optional SNMP adapter are provided. A multi-function LCD display built into the front panel displays the device’s operating status, including error codes.
With a weight of 62 kg, the device has dimensions of 191 × 495 × 711 mm. Installation type: TOWER. The noise level is 58 dB. The product has IP20 protection degree, as well as protection against short circuit, overload, overheating, full battery discharge and fan check ability.