2E Industrial Dehumidifier, 750W, 90l/day, 140m sq, 300m cubic/h, LCD display, electric control, timer, IP22
Industrial dehumidifier 2E 750 W is a powerful, mobile dehumidifier for removing excess moisture from the air in rooms with an area of up to 140 m2.
| Type | Dehumidifier |
| Power, W | 750 |
| Maximum power, W | 950 |
| Air circulation, m³/h | 300 |
| Recommended room area, m2 | Up to 140 (up to 2.7 m height) |
| Dehumidification capacity, l/24h | 50 |
| Humidity control range | RH10% to 95% |
| Operating temperature | From +5 to +35°C |
| Refrigerant | R290 |
| Refrigerant quantity, g | 200 |
| Programming of operation time, h | Up to 24 |
| Degree of protection | IP22 |
| Power supply voltage, V | 220-240 |
| Frequency, Hz | 50 |
| Current, A | 4 |
| Sound pressure level (LPA), dB | 56 |
| Power cord length, m | 1.5 |
| Additionally | On/off timer Saving of settings (in case of sudden shutdown) LCD display Easy to clean filter Automatic defrost function Water drainage via rubber tube Possibility of continuous drainage (drainage) Mobile design on wheels for transportation |
| Dimensions (WxHxD), cm | 48x65.5x45 |
| Weight, kg | 30 |
| Package contents | Dehumidifier, lever, wheels, water container, manual with warranty card |
| Manufactured | China |
| Warranty | 12 months |
It is used for dehumidification of storage rooms, damp basement, when eliminating the consequences of flooding, for precise control of microclimate in storage, as well as in construction, for drying plaster, screed, for drying wooden or plaster products, to maintain humidity in warehouses and production facilities.
Dehumidifier 2E-ID750-50L operates in the temperature range from +5 to +35°C with a capacity of up to 50 liters of moisture removal per day. Condensate can be discharged either into a container or into the drain (sewer).
A wide range of air humidity control, adjustable from 10 to 95% relative humidity, is a very important mode for technological processes or storage conditions in the warehouse. It is set by means of buttons and is shown on the display. The display then changes to show the current humidity level.
The robust steel housing of the dehumidifier with anti-corrosion coating guarantees its strength and durability, while the high tightness guarantees protection against water/dust ingress inside the dehumidifier mechanism.
Due to the large wheels and steel handle, it is easy to transport or quickly move in construction or production sites without much effort.
On/off timer.
Protection against frequent starts. After switching off, the compressor is switched on again with a delay of 3 minutes.
Control panel with indication of operating and emergency modes.
Highly efficient and environmentally friendly refrigerant R290 is used, which is considered one of the best options and is widely used in modern refrigeration equipment.