2E Garden Hose AquaFlex Graphite 1/2″ 20m 4 layers 20bar -10+50°C
The reinforced 2E-GHC12C20 AquaFlex Graphite series garden hose will withstand harsh conditions and heavy loads. Hose length is 20 m, diameter is 1/2″. Multilayer (4 layers) provides increased resistance to UV rays and chemicals, wear resistance, high throughput, flexibility and resistance to twisting, increased operating water pressure (20 bar).
- Hose diameter 1/2″ (12.5 mm)
- Hose length 20 m
- Number of layers 4
- Temperature range from -10 to +50 °C
- Resistant to UV rays
- Bursting pressure 20 bar
- Material PVC
- Wall thickness 1.6 mm
- Weight 95 g/m
- Transverse reinforcement
- Outer layer, color: gray with yellow stripe
- Inner layer: white
Type | hose |
Application | for irrigation |
Hose diameter | 1/2 (12.5 мм) |
Hose length | 20 m |
Features | resistant to UV rays |
Series | AquaFlex Graphite |
Number of layers | 4 layers |
Burst pressure | 20 bar |
Additional information | does not contain cadmium, barium and lead / transverse reinforcement / Made in the EU |
Material | PVC |
Operating temperature | -10 to +50°C |
Weight | 95 g/m |
Colour | gray із жовтою смужкою (зовнішній шар) / white внутрішній шар |
Priority: Quality and Safety
The AquaFlex Graphite hose is made of high-quality PFC materials and is free of cadmium, barium and lead. It is flexible and lightweight, allowing for a wide range of applications. The hose is 20 m long, so it can be used to irrigate a lawn, garden, clean chad paths, building facades, and even wash a car. The common 1/2″ diameter allows for a comfortable connection to the water supply.
Fail-Safe Operation
Consists of 4 layers, which increases its service life for several seasons in a row. Thanks to the transverse reinforcement, it will be protected from mechanical damage or tearing at the bends. It is resistant to UV radiation – you can safely leave it under the sun and not worry about its safety. It retains its operational properties when exposed to a wide range of temperatures (from -10 to +50 °C). The special design prevents the deposition of algae inside – the water flowing through the hose will be of high quality.
Long Service Life Factors
To extend the hose’s service life for many seasons, you need to follow basic rules. The water pressure supplied to the hose must not exceed the operating pressure of the hose. Before preparing for winter storage, remove all water from the hose and allow it to dry thoroughly. The hose must not be kinked during storage. The recommended temperature in the room where the hose is stored should be at least 0 °C.