Solar Cables 2E with MC4 connector-3T1
The 2E cable set with MC4 jacks is useful for efficient parallel or series-parallel connection of portable solar or PV panels. The kit consists of two three-line splitter cables, made of quality materials, which are designed to reliably and safely connect two or more solar panels (or chains of solar arrays) with the same voltage.
- Two splitter cables for three lines
- Branching scheme: "male" (+) to 3 × "female" (-) and "female" (-) to 3 × "male" (+)
- Polarity is marked by color
- MC4 jacks
- Max. voltage is 1,000 V
- Max. current is 30 A
- Cable cross-section 4 mm²
- Compliance with CE62930, IEC131, H1Z2Z2-K standards
- Tinned copper contacts
- Cables’ length is 30 cm
| Type | Solar panel cable set |
| Connector type | МС4 |
| Cable length | 0.3 m |
| Voltage | 1000 W |
| Maximum operating current | 30 A |
| Cable cutting | 4 mm² |
| Cable standard | CE62930 / IEC131 / H1Z2Z2-K |
| Operating temperature range | -40 ...- +85 °С |
| Contact material | tinned copper |
Specifications
- Two splitter cables for three lines
- Branching scheme: "male" (+) to 3 × "female" (-) and "female" (-) to 3 × "male" (+)
- Polarity is marked by color
- MC4 jacks
- Max. voltage is 1,000 V
- Max. current is 30 A
- Cable cross-section 4 mm²
- Compliance with CE62930, IEC131, H1Z2Z2-K standards
- Tinned copper contacts
- Cables’ length is 30 cm
Branching pattern: "male" (+) to 3 × "female" (-) and "female" (-) to 3 × "male" (+). Polarity is marked by color: "+" – red, "-" – black. Cables can be used to expand an existing or build a new solar panel system – both stationary and portable. The maximum voltage is 1,000 V, and the current is 30 A. The products comply with CE62930, IEC131, H1Z2Z2-K standards, the contact material is tinned copper. Each 30 cm long cable has a cross section of 4 mm² for optimal performance and reliability.
