2E Industrial Dehumidifier, 1000W, 90l/day, 250m sq, 500m cubic/h, LCD display, electric control, timer, IP22

SKU: 2E-ID1000-90L

Industrial dehumidifier 2E 1000 W is a powerful, mobile dehumidifier for removing excess moisture from the air in rooms with an area of up to 250 m2.

Characteristics
Where to buy
Type Dehumidifier
Power, W 1000
Maximum power, W 1350
Air circulation, m³/h 500
Recommended room area, m2 Up to 250 (up to 2.7 m height)
Dehumidification capacity, l/24h 90
Humidity control range RH10% to 95%
Operating temperature From +5 to +35°C
Refrigerant R290
Refrigerant quantity, g 300
Programming of operation time, h Up to 24
Degree of protection IP22
Power supply voltage, V 220-240
Frequency, Hz 50
Current, A 6
Sound pressure level (LPA), dB 60
Power cord length, m 1
Additionally On/off timer
Saving of settings (in case of sudden shutdown)
LCD display
Easy to clean filter
Automatic defrost function
Water drainage via rubber tube
Possibility of continuous drainage (drainage)
Mobile design on wheels for transportation
Dimensions (WxHxD), cm 48x89x40.5
Weight, kg 45
Package contents Dehumidifier, lever, wheels, rubber hose for draining water, manual with warranty card
Manufactured China
Warranty 12 months
Manual

It is used for dehumidification of storage rooms, damp basement, when eliminating the consequences of flooding, for precise control of microclimate in storage, as well as in construction, for drying plaster, screed, for drying wooden or plaster products, to maintain humidity in warehouses and production facilities.

 

Dehumidifier 2E-ID1000-90L operates in the temperature range from +5 to +35°C with a capacity of up to 90 liters of moisture removal per day. Condensate can be discharged either into a container or into the drain (sewer).

 

A wide range of air humidity control, adjustable from 10 to 95% relative humidity, is a very important mode for technological processes or storage conditions in the warehouse. It is set by means of buttons and is shown on the display. The display then changes to show the current humidity level.

 

The robust steel housing of the dehumidifier with anti-corrosion coating guarantees its strength and durability, while the high tightness guarantees protection against water/dust ingress inside the dehumidifier mechanism.

 

Due to the large wheels and steel handle, it is easy to transport or quickly move in construction or production sites without much effort.

 

On/off timer.

 

Protection against frequent starts. After switching off, the compressor is switched on again with a delay of 3 minutes.

 

Control panel with indication of operating and emergency modes.

 

Highly efficient and environmentally friendly refrigerant R290 is used, which is considered one of the best options and is widely used in modern refrigeration equipment.